ABS Medical plastic enclosure for medical diagnostic equipment, Very complex parting line and strange shapes. It is used for clinical diagnosis for illness. It is made for our Israel and Europe customer .
Project details as below :
Medical plastic enclosure injection mould
Core surface finish:
Medical grade ABS White color
Cavity surface finish:
VDI 3400 Texture
No of Cavities:
Type of gating:
1 pcs slider of each. S136 with heat treatment
Lead time for T1:
Mold base steel:
Total Mold Price Totally:
1） RAL9003 white color and Medical grade ABS
2) High softening material up to 100 cent degrees
3) CPK control for the critical dimension up to 1.67
4) VDI 3400 MATT finishing
5) Warpage control for the side wall and assemble
Asia Billion is one stop supplier for your medical device custom plastic enclosures and medical injection tooling needed. All our medical device plastic injection mold or medical plastic enclosure are according to USA FDA SPI Mold Class 101 to 105. we can help you realize your ideals from concept to mass production with engineering production design and manufacturing feasibility improvement capacity. We have a lot of high quality medical plastic enclosure injection molding and mold fabrication experience. If you have any medical plastic enclosure or medical plastic injection tooling or similar with this, please contact us freely.
Asia Billion medical plastic enclosures mold making process:
Our Tool shop Overview
Asia Billion Quality Control
Our Logistic Solution
SPI CLASSIFICATIONS OF INJECTION MOLDS
The following contains a brief synopsis of the various mold classifications and the detailed descriptions of each medical device injection mold class. Again, it is our recommendation that a MOLD DATA SHEET (an example of which is in the back of this Guide) be included with each request for quotation.
CLASS 101 MOLD
*Cycles life: One million or more
Description: Built for extremely high production. This is the highest-priced mold and is made with only the highest quality materials.
CLASS 102 MOLD
*Cycles life: between 500,000 and one million
Description: Medium to high production mold, good for abrasive materials and/or parts requiring close tolerances. This is a high quality, fairly high-priced mold.
CLASS 103 MOLD
*Cycles: Under 500,000
Description: Medium production mold. This is a very popular mold for low to medium production needs. Most common price range.
CLASS 104 MOLD
*Cycles life: Under 100,000
Description: Low production mold. Used only for limited production preferably with non-abrasive materials. Low to moderate price range.
CLASS 105 MOLD
*Cycles: Not exceeding 500
Description: Prototype only. This mold will be constructed in the least expensive manner possible to product a very limited quantity of prototype parts.
Until 2018 years, Asia Billion had made more than 500 sets medical plastic injection tooling for our global customers and we also made a lot of custom medical plastic enclosure for medical diagnostic equipment, because this plastic enclosures normally don't need the cleanroom and 13485 medical quality certification.
Please contact us at:
Address:Building 9, Wantou Industrial Park, Hongxing Village, SongGang Town, Shenzhen City, China
Tel: 0086-134 8063 8827