Silicone Rubber Molding Company

Silicone Rubber Molding Company

If you need any silicone rubber molding company or project support, please contact us directly.Silicone rubber key pad molding Project for USA customer, the material is 60 shore A silicone with over molding of PC plastic keys. This silicone rubber is used for scanner of iot device , silkscreen printing and UV coating for the surface with dull finishing .

Product Details

  Silicone rubber key pad molding Project for USA customer, the material is  60 shore A silicone with over molding of PC plastic keys.  This silicone rubber is used for scanner of iot device  , silkscreen printing and UV coating for the surface with dull finishing .

Production details:  


silicone rubber molding company

Core surface finish:


Production Material:

Silicone rubber

Cavity surface finish:


No of Cavities:

1 x 12

Injection Type

compression silicone rubber molding

Core Material:


Type of gating:


Cavity Material:


Cycle Time:

100 s

Slider material:


Lead time for mold making and approved production:

15 days

Place of Origin



PE bag and carton

Product Characters:

1. High quality custom silicone rubber keypad molding

2. Good toughness with UV coating and silkscreen printing .

3. Very critical and fast lead time for production

4. Several different times over molding between silicone and plastic keys

5. Unique design for multi-function for the keypad for different device

     Asia Billion is high quality custom silicone rubber molding company in Shenzhen south of China, we are ISO 9001 certified and accord to the TS 16949 standard to control our manufacturing process. If you have any silicone rubber keypad project or similar with this, please contact us freely.

ABIL silicone rubber molding Plant Overview:

ABIL silicone rubber molding manufacturing Process

ABIL  Quality Control and Certifications:

ABIL high precision plastic injection molding certifications and quallity control

Packing and Logistics:

ABIL high precision plastic injection molding packing and logistics

Physical properties of silicone rubber material

1. High temperature resistance:

The most remarkable characteristics of silica gel are high temperature stability and can be used for a long time in the environment of 250 °C - 300 °C. If you choose the right silicone filler and silica gel high temperature additive, the application temperature can be as high as 375 ° C, and can withstand thousands of degrees of high temperature. According to estimates, silica gel has a service life of up to 20 years at 120 ° C and up to 5 years at 150 ° C, which is not easy to age.

2. Low temperature resistance:

Silica gel has inherent low temperature elasticity. Natural rubber or other synthetic rubber has a lower embrittlement point, and silica gel can generally work normally at a low temperature of -50 ° C to -60 ° C. 3. Breathability: The silicone film has good gas permeability. The air permeability of air, nitrogen, oxygen, carbon dioxide and other gases at room temperature is 30-50 times higher than that of natural rubber.

4. Electrical performance:

Silicone has outstanding electrical properties. The outstanding advantages are that the dielectric strength, power factor and insulation properties are very small due to changes in temperature and frequency, over a wide temperature range; the dielectric constant and dielectric loss tangent are almost constant. The corona resistance and arc resistance of silica gel are also very good. Breakdown voltage: 20~25 kV/mm; dielectric constant 3~32 dielectric loss tangent 3~3, 5X10-3; volume resistivity 1X1016 ohm/cm.

5. Excellent physical and mechanical properties:

The hardness is between 35 and 75 Shore A, the tensile strength is from tens to 105 KG/CM2, and the elongation is within 1000%. These properties are adjusted according to different product requirements. Although the mechanical properties of silica gel at room temperature are lower than those of general-purpose rubber, its mechanical properties are far superior to those of general-purpose rubber at 150 ° C. The shrinkage of silica gel is 7%-10%, and the mechanical properties are unchanged.

6. Weather resistance:

Silica gel has excellent resistance to oxygen, ozone and UV radiation. It has long been used outdoors without cracking.

7. Physiological inertia:

Silicone itself is inert to humans, it is odorless, tasteless and non-toxic. In addition, silica gel also has low surface activity and low temperature absorption properties.

8. Chemical resistance:

Generally speaking, silica gel has good chemical resistance, fuel oil and oil resistance. The effect of the solvent on the silica gel is mainly soaring and softening, and most of the original properties of the silica gel are restored once the solvent evaporates. The tolerance to polar and edible oils such as ethanol and fluorenone is quite good, the mechanical properties are not lowered at all, and the tolerance to low concentrations of acids, bases and salts is good. (If immersed in 10% sulfuric acid at room temperature for 7 days, the volume and weight change are less than 1%, the mechanical properties are unchanged), but it is not resistant to concentrated sulfuric acid, concentrated alkali and carbon tetrachloride, toluene and other non-polar solvents.

In the 2019 years , we already made more than 15 project for the silicone rubber mold and we become the expert as a keypad Silicone Rubber Molding Company. if you need a excellent partner , please let us know freely.

Previous:PEI Plastic Injection Molding Next:Custom Plastic Injection Molding Company Ohio


You Might Also Like