Custom Plastic Injection Molding Company Ohio

Custom Plastic Injection Molding Company Ohio

High quality custom plastic injection molding company Ohio state from China for you, it is made by Nylon engineering material for automotive industry. T connector for automotive. High volume production parts more than 500K per year. Level 2 PPAP is finished by Asia Billion team.

Product Details

High quality custom plastic injection molding company Ohipo state in China for you, it is made by Nylon engineering material for automotive industry. T connector for automotive. High volume production parts more than 500K per year.  Level 2 PPAP is finished by Asia Billion team. 


Production details: 


Type:

Custom plastic injection molding

Core  surface finish:

MT 11030 Texture

Production  Material: 

PA6+10%GF

Cavity  surface finish:

MT 11030 Texture

No of  Cavities:

1x 2

Injection  System

Hot Nozzle

Core  Material:

S7 with heat treated

Type of  gating:

Direct  gate

Cavity  Material:

S7 with heat treated

Cycle time:

45 s

Slider  material:

S7    with heat treated

Lead time  for Production

40 days

Cooling:

Cold water

Shot life:

1 000 000

Place of Origin

China

Packaging:

PE bags and Carton

 

Product Characters

1)     Automotive  custom plastic injection molding company Ohio

2)     Precision dimension control for the connector tube

3)     Quick lead time and competitive cost for injection molding tooling

4)     Cycle time control to less than 45 seconds


   Please note that this information is just for reference and don’t copy or use to others purposely.


ABIL Injection Molding Process:

ABIL custom injection molding process

ABIL Injection Molding Plant Overview:

ABIL Plastic Injection molding Plant Overview


ABIL Certifications and Quality Control:

ABIL Plastic Enclosures Quality Control and Certifications


Packing and Logistic:

ABIL Plastic Production Packing and Logistics


Three key points in the design of injection molding products


First, the mold opening direction and parting line

 

   Each injection molding product must first determine its mold opening direction and parting line at the beginning of the design to ensure that the core slider mechanism is minimized and the influence of the parting line on the appearance is eliminated.

 

1. After the mold opening direction is determined, the reinforcement ribs, snaps, protrusions and other structures of the product are designed to be in the same direction as the mold opening direction, so as to avoid the core pulling to reduce the seam line and prolong the life of the mold.

 

2. After the mold opening direction is determined, the appropriate parting line can be selected to avoid the reverse buckle in the mold opening direction to improve the appearance and performance.

 

Second, the draft angle

 

1. Appropriate drafting angle can avoid product pulling (drawing). The smooth surface of the draft should be ≥ 0.5 degrees, the fine grain (sand surface) surface is greater than 1 degree, and the rough grain surface is greater than 1.5 degrees.

 

2, the appropriate draft angle can avoid product top injuries, such as white, top deformation, burst.

 

3. When designing the deep cavity structure, the outer surface slope should be greater than the inner surface slope as much as possible to ensure that the mold core is not biased during injection, to obtain a uniform product wall thickness, and to ensure the material strength of the product opening.

 

Third, the product wall thickness

 

1. All kinds of plastics have a certain wall thickness range, generally 0.5~4mm. When the wall thickness exceeds 4mm, it will cause the cooling time to be too long, resulting in shrinkage and other issues, and should consider changing the product structure.

 

2, uneven wall thickness will cause the surface to shrink.

 

3, uneven wall thickness will cause pores and weld lines.


Asia Billion is a Chinese Injection mold and molding company , but we are also a  custom plastic injection molding company Ohio area , we have some partners at there and can give you the local support.

Hot Tags: custom plastic injection molding company ohio, China, suppliers, manufacturers, company
Previous:Silicone Rubber Molding Company Next:Plastic Injection Molding Companies Near Me

Inquiry

You Might Also Like