TPE Materials Are Widely Used In Auto Interior Products

- Jul 05, 2019-


TPE materials are widely used in auto parts/interior products


   With the development of the modern automobile industry and the increasing production of automobiles, the demand for auto parts/auto interiors has also increased rapidly. In auto parts/interior products, TPE materials are comfortable to touch, light in weight, rust-proof, vibration-absorbing, and highly flexible in design, making TPE/auto parts TPE/automobile interior and exterior TPE/TPE materials in auto parts/interior products It is widely used and is one of the key development directions in the future.


TPE's advantages in automotive parts:

 

1. Great design freedom

 

   The processing method is flexible, and can be processed by different processing methods such as injection molding, extrusion, calendering, blow molding, plastic molding, and slush molding. The appearance can be designed as a matte matte, glossy, transparent, translucent product with a variety of appearances, which improves the design freedom of the product designer.

 

2, the product has excellent weather resistance and temperature resistance

 

  The molecular structure of the TPE material does not contain aging-resistant double bonds, and is equipped with excellent weathering aids, which can impart excellent anti-xenon aging properties and resistance to thermal aging. The high temperature resistant TPE can be used stably at a temperature of 125 degrees for a long time.

 

3, high processing efficiency

 

  The complex products can be molded at one time, and can be mass-produced by various molding methods, with high production efficiency, low cost and remarkable economic benefits.

 

4, excellent physical properties

 

  The product has excellent mechanical properties, excellent bending fatigue, excellent wear resistance, and good resilience.

 

5, soft touch, mild texture

 

  TPE materials have a soft touch and a mild texture. Anti-silicone TPE has a more excellent touch, smooth and not sticky, dirt-resistant, scrub-resistant, and not sticky.

 

6, low odor, low VOC

 

  TPE material developed for the low odor and low VOC requirements of automotive interiors, after odor detection, the odor intensity level is 2.4, in line with the latest automotive interior 3.0 standards, product VOC test results, benzene, toluene, xylene, No formaldehyde was detected. This product fully meets the requirements of automotive interiors.

 

7, environmental protection

 

  The products are environmentally friendly and meet the environmental requirements of REACH, ROHS, polycyclic aromatic hydrocarbons, nonylphenol, etc. The products can be recycled.

 

8, other product features

 

  The product can be heat welded, microwave solderable, injection foamable, extrudable foaming, halogen free flame retardant, blowable, castable, blisterable...


We are a small/middle size professional injection tooling & injection molding manufacture as well as metal machined components in South China .Our stability quality, Lower price and good service has given our customer a big confidence to new production development and market competition . ISO 9001 certified and TS 16949 compliance, each project  with


  Asia Billion is a small/middle size professional injection tooling & injection molding manufacture as well as metal machined components in South China .Our stability quality, Lower price and good service has given our customer a big confidence to new production development and market competition . ISO 9001 certified and TS 16949 compliance, each project  with very competitive price and quality assurance.

 

Asia Billion main advantages as below :

 

1) 5% to 30% price lower than  your local supplier or current supplier in China with same design or better quality.

2) Good customer service with quicker response

3) Early Project mechanical researching involved capacity for new production development

4) shorter Lead time  stronger engineering team for mold design , mold simulation and quality assurance( DFM , full mold drawings, Mold flow simulation report can be provided )

5) all the requirements of certifications can be provided

6) Good knowledges for resin, steel and mechanical production design , we can help you optimize your project

7) High educated management team with long time working experience with oversea companies and all can speaking English

8) High precision injection mold and over mold is our big advantages than others ( Min tolerance for production can be +/-0.02mm, mold tolerance can be 0.005mm)

9) Good experience and understanding for SPI class 101 to 105 medical injection mold making classification

10) Small to middle size manufacturing and only service for high quality customer, we are easier to working with customer and smart enough.

11) we are fasting growing and smart or flexible enough for different demanding or some emergency conditions.

12) Good supply chain experience with Medical device , automotive , electronic or others industry OEM companies.

 

If you have any RFQ, please feel free to contact us.

Asia Billion innovational Technology

E-mail: sales@ab-industry.com 
Phone: 0086-134 8063 8827


Previous:Solutions For Common Defects In TPE Injection Molding Next:TPE Over Molding Technology Introduction