Precision Plastic Injection Mold Company

Precision Plastic Injection Mold Company

High precision plastic injection mold company with tolerance around 0.02mm for you, precision plastic PPE material connector for medical device industry. This project come from Molex Inc's tier 1 electronic supplier in Singapore. No draft angle is allowed or the kiss-off inside hole for metal...

Product Details

High precision plastic injection mold company with tolerance around 0.02mm for you, precision plastic PPE material connector for medical device industry. This project come from Molex Inc's tier 1 electronic supplier in Singapore. No draft angle is allowed or the kiss-off inside hole for metal pins.


Mold details:  


Type:

Medical device high  precision injection tooling

Core surface finish:

Mirror EDM finishing

Production Material:

PPE  FG510

Cavity surface finish:

Mirror EDM finishing

No of Cavities:

1x4

Injection System

Cold Runner

Core Material:

8407 with heat treated

Type of gating:

 edge gate

Cavity Material:

8407 with heat treated

Ejection system:

Ejection pin

Slider material:

N/A

Lead time for T1

40 days

Mold base steel:

P20

Shot life:

1 000 000

Mold size:

350 x 450 x 380 mm

Mold Price:

 USD 14500


Product Characters


1. Chlorine free element

2. High precision injection tooling with tolerance 0.02 mm, mold steel tolerance 0.005mm

3. Clean kiss-off holes and free of flash

4. Stability dimension control with CPK level to 1.67

5. No draft and scratch for the Pin holes


Please note that this information is just for reference and don’t copy or use to others purposely.


Asia Billion Precision Injection mold Process showing:

Asia Billion Precision Injection Mold process showing



Asia Billion Engineering and Project Capacity:

Asia Billion Engineering and Project capacity

Precision Injection Mold Workshop Overview:

Precision Injection Mold workshop Overview


Quality Control:


Asia Billion Precision Injection mold quality control 


Packing and Logistics:

Asia Billion Mold packing and logistics


 Our Order Process:  please reference this link: http://www.asia-billion-moulds.com/news/asia-billion-industry-mold-and-molding-product-10142281.html


 Plastic Connector classificatior


 The classification of connectors has been confusing for many years, and each manufacturer has its own classification methods and standards. In 1989, with the support of the National Association of Electronic Distributors (NEDA, the National Electrodistributors Association, which is an industrial education organization), several manufacturers of connectors were brought together to develop a connector classification standard and terminology. The molex company participated in the development process. NEDA Standard This standard developed by NEDA is called LevelsofPackaging. The summary is described in the following table: Level Description 0IC chip or chip to package connector Please note that the first level is "0", not "1". This level does not actually involve a connection. Level 0 is an integrated circuit chip. Molex does not manufacture IC chips. But the production of the chip is connected to the socket of the circuit board. 1IC component or component to (circuit) board connector When the IC chip is installed in the socket of the circuit board, it is a level 1 connection. 2 (printed) board (PCB) to (printed) board connector 2 level connector for the connection between printed circuit boards. .3 Wire-to-Board or Sub-Combination to Sub-Combination Connector 3-level connectors connect printed circuit boards and sub-assemblies, or connect two sub-combinations. Sub-combination is an integral part of electronic products. According to Molex's habits, Level 3 also includes certain wire-to-wire connectors. 4 chassis to chassis or input/output connector 4 level connectors provide power or signal connections. The general rule of thumb is to use a 4-level connector when the connection involves audio or video signals, or when connecting to a network or computer. Regarding the above connector levels, note as the following:

 ■ Some connectors can be used for more than one level. For example, the 3-level connectors QF50 and MX50 can be used for level 2 or level 4. Also known as the 4-stage Molex input/output plugs and sockets, it can also be used for wire-to-board or board-to-board connections. 

■ In actual work, the connector is rarely talked about at the above level, but it is discussed in terms of the appearance and connection of the connector, such as board to board and line to line. Levels are used to learn and classify connectors.


 Asia Billion are a small/middle size professional precision plastic injection mold company & injection molding manufacture in South China .Our stability quality, Lower price and good service has given our customer a big confidence to new production development and market competition. ISO 9001 certified and TS 16949 compliance, Level 3 degree US standard PPAP and CPK available for each project  with competitive price . We have great successful experience for automotive & medical device new production development. 


contact us freely as below :

Asia Billion Innovational Technology Ltd

E-mail: sales@ab-industry.com  
Phone: 0086-134 8063 8827
Skype:cjiangping

 WeChat ID:8613480638827

Hot Tags: Precision Plastic Injection Mold Company, China, suppliers, manufacturers, company
Previous:China Precision Plastic Injection Mold maker Next:High Precision Plastic Injection Mould

Inquiry

You Might Also Like