Medical precision injection mold for laboratory appliance in China for you, It is used for clinical diagnosis in hospital. It is made for our Mexico and USA customer . Low volume production for second type medial device with high requirements. Competitive price both for plastic injection mold and plastic enclosure . Shining surface finishinng and so many small details features.
Project details as below :
Type: | medical precision injection mold | Core surface finish: | SPI B1 polishing |
Production Material: | Medical grade PC | Cavity surface finish: | SPA A1 polishing |
No of Cavities: | 2 cavities | Injection System | Cold runner |
Core Material: | LKM S136H | Type of gating: | Sub gate |
Cavity Material: | LKM S136H | Ejection system: | Ejection pin |
Slider material: | 4 sliders , LKM S136H | Lead time for T1: | 6 weeks |
Mold base steel: | SS420H | Shot life: | 500 000 |
Total Mold Price : | USD 18500 | Manufactures: | Asia Billion |
Product Characters:
1） Medical plastic injection molding anf tooling without cleanroom
2) SPI A1 shining surface finishing and a lots of kiss off holes
3) MOQ 300 pcs per order.
4) All material certifications and inspection reports are required
5) Traceability documents is needed from the material step.
Asia Billion is one stop supplier for your medical device precision injection mold and medical injection molding product. All our medical device plastic injection mold or medical plastic enclosure are according to USA FDA SPI Mold Class 101 to 105. If you have any medical enclosure of plastic injection molding or similar with this, please contact us freely
Asia Billion Mold making process:
Tool shop Overview:
Asia Billion Quality Control
Our Logistic Solution
Design principles for medical equipment injection molded parts BOSS:
1. Pillars should not be used alone. They should be connected to the outer wall or used together with the ribs. The purpose is to strengthen the strength of the pillars and make the rubber flow more smoothly.
2. The height of the pillars is generally not more than two and a half times the diameter of the pillars. Excessive pillars can cause plastic parts to become trapped when they are formed (the pores will cause pores, burnt, insufficient filling, etc.).
3. If the height of the pillar exceeds two and a half times the diameter of the pillar, especially the pillar away from the outer wall, the method of strengthening the strength of the pillar is to use the reinforcing rib.
4, BOSS shape is mainly circular, other shapes are difficult to process
5. The position of the BOSS should not be too close to the corner or the outer side wall. It should be kept at a distance from the outer wall of the product.
6), around the BOSS can be used to remove part of the meat thickness (ie open the crater) to prevent shrinkage and subsidence
7), BOSS dialing angle: usually take 0.5 ° outside, take 0.5 ° or 1 ° inside
