as everybody know at the beginning of 2020 years, the Covid-19 coronavirus change the world and life a lot, so many people 's life and working is changed and all we meet an emergency situation for difference countries. one of our medical device customers in Europe want to develop the infrared thermometers for their local market , but the project must can be launched within 10 nature days. so we understand this and discuss with our customer to develop these infrared thermometer plastic injection mold and molding production items. we send the plastic housing to out customer's china local electronic supplier and assemble as the final production and air ship to Europe. totally are 3 sets mold.
Mold details:
Type: | medical plastic injection mold | Core surface finish: | polishing |
Production Material: | ABS & PC | Cavity surface finish: | High polish and Matt finishing |
No of Cavities: | 2+2 and 4+4 | Injection System | cold runner |
Core Material: | LKM 738H | Type of gating: | sub gate |
Cavity Material: | LKM 738H | Ejection system: | ejector pin |
Slider and lifter material: | LKM 738H | Lead time for T1 | 10 days |
Mold base steel: | 1045 | Shot life: | 300 000 |
Place of Origin | China | Supplier : | Asia Billion |
Product Characters:
1) so urgent lead time for the mass production mold. and the first sample must be ok for final production in one time
2) 3 times double cost spending due to this emergency situation for the mold development , we ask our workers work overtime at nigh
3) 2 shifts working per day which can let us working 24 hours per day due to this so emergency situation
4) the first sample must be ok for final production in one time, so we need to check the each step one by one wo make sure all are completely correct
Asia Billion company overview:
Introduction of infrared thermometer
Infrared thermometers are used to measure body temperature through infrared rays. They are divided into two types: contact and non-contact. Infrared thermometers are relatively safe and accurate for temperature measurement, suitable for elderly, children, hospitals and families.
Working principle:
Infrared thermometer is a kind of measuring instrument that uses the principle of radiation to measure human body temperature. The infrared sensor used only absorbs the infrared radiation radiated from the human body without emitting any rays to the outside world, and senses the human body temperature through non-contact method. The human body's infrared thermal radiation is focused on the detector, which converts the radiated power into an electrical signal, which can be displayed in temperature units after being compensated for ambient temperature.
Classification:
Infrared thermometers are mainly divided into contact infrared thermometers and non-contact infrared thermometers. This time we mainly discuss non-contact infrared thermometers. The most common is a forehead gun, which can be used to measure the temperature of the human body. Just point the probe at the forehead and press the measurement button, and the measurement data can be obtained in only a few seconds. It is very suitable for patients with severe illness, the elderly, infants and young children. However, at the initial stage of use, the user may not be familiar with this operation method, and may obtain several different measurement data. Generally speaking, the measured maximum value is the required data. The user will be more satisfied with this thermometer after being familiar with it.
Advantages and disadvantages:
The infrared thermometer has the advantages of convenient, simple, fast and accurate temperature collection, which is very suitable for patients with severe illness, the elderly, infants, etc. The disadvantage is that it is susceptible to ambient temperature, and the error is large in this case.
If you have want to develop your own brand infrared thermometer plastic injection mold or molding plastic items, or you want to develp some other medical device plastic injection mold. please contact us freely.
