Plastic Injection Molders

Plastic Injection Molders

Asia Billion is a high quality custom plastic Injection molders in China with top quality and low cost for you. It is a big part around 355 mm diameters. 1 cavity mold with 4 point submarine injection point at the inner side wall . the injection molding material is engineering nylon. the part are used at the industrial equipment and home appliance. High requirement for the texture surface finishing of moldtech MT 11020.

Product Details

  Asia Billion is a high quality custom plastic Injection mold maker in China with top quality and low cost for you. It is a big part around 355 mm diameters.  1 cavity mold with 4 point submarine injection point at the inner side wall .  the injection molding material is engineering nylon. the part are used at the industrial  equipment and home appliance. High requirement for the texture surface finishing  of moldtech MT 11020. 


Project details as below :

Type:

Injection Mold

Core surface finish:

polishing

Production Material:

engineering nylon

Cavity surface finish:

MT11020 texture

No of Cavities:

1 cavities

Injection System

One drop Hot runner

Core Material:

LKM 718H

Type of gating:

Sub gate

Cavity Material:

LKM 718H

Ejection system:

Ejection stripper plate

Slider material:

N/A

Lead time for T1:

20 days

Mold base steel:

1050

Shot life:

300 000

Total Mold Price :

USD 10000

Manufactures:

Asia Billion

 

 Product Characters:

1) Precsion and over moding plastic injection molders in Shenzhen with low cost and top quality

2)    Engineering nylon plastic molding tooling

3)   Critical roundness control up to 0.2mm for the part with 4 points sub gate

4)   Very fast lead time for T1 just 20 days due to it is a urgent project

5)  The mold are approved and shipped after T2 mold trial , the total mold manufacturing time from start to ship is just 40 days. 

6)  Custom color injection molding items


    Asia Billion is precision injection molder in China with good quality and low price. If you have any custom nylon plastic injection molding project , please contact us freely

Asia Billion mold making process:

Asia Billion mold making process



Tooling shop Overview:

Our Tool shop Overview


Asia Billion Quality Control

 quality control


Our Logistic Solution

logistics




How to maintain plastic Injection mold?


   As a professional plastic mold manufacturer, Asia Billion summarizes the basic maintenance knowledge of several basic plastic molds and develops basic maintenance habits to extend the life of the mold:



 First, the maintenance of the mold before production:


1. The oil on the surface of the mold must be cleaned and the rust cleaned. Check if there is any foreign matter in the cooling water hole of the casting mold. Is there any water passage?


2. It is necessary to check whether the arc in the mold rubber sleeve is damaged, whether there is residual foreign matter, whether the moving part is abnormal, and whether the movement is smooth.


Second, the maintenance of the mold in production


1. Check all the guided guide posts of the mold every day, whether the guide bush is damaged, including the mold guide post, the row position, the insert insert and other components, and regularly refuel it.


2. Clean the foreign body glue wire, foreign matter, oil, etc. of the mold parting surface and the exhaust groove and check whether the thimble of the mold is abnormal and regularly oil, and clean the mold surface and the flow surface twice a day. Guide the tip, bushing, and position to determine the tip of the oil once a day.


3. Regularly check whether the water path of the mold is unblocked and tighten all the fastening screws.


4. Check if the limit switch of the mold is abnormal, and whether the oblique pin or the inclined top is abnormal.


Third, the maintenance of the shutdown mold


   Before shutting down, the cooling water circuit must be closed, the residual water in the water path in the mold should be blown off, and the surface of the mold should be checked for residual rubber filaments. After cleaning the foreign materials, evenly spray the anti-rust agent and fill in the relevant records accurately.


Contact Asia Billion freely if you need a good plastic injection molders supplier.

Previous:Home Appliance Plastic Injection Mold Next:Plastic Mould Manufacturers In China

Inquiry