Asia Billion recently years make a lot iot and smart household home appliance plastic housing mold. this one is the air dehumidifier plastic housing mold. The director of Asia billion is a fan of this air dehumidifier and push to win this project because he hate the very wet weather a lot. this weather cause many troubles such as eczema and allergy and even can't dry your washing clothes for long time. the weather in Guangdong of China are always in this situation, hot and very wet from the April to October as it is near the sea and in the hot area. all over the world, there are a lot of similar place and many people have these troubles all the time , this device will be a very good help to control the moisture in good level for people leaving.
plastic injection mold
Core surface finish:
sand paper polishing
Cavity surface finish:
No of Cavities:
1 and 2 cavities
Type of gating:
Ejector pin and ejector sleeve
Slider and lifter material:
SKD 61 with heat treatment
Lead time for T1
Place of origin:
1) Innovative design and production to help the people in wet and hot area for better life and healthy control
2) smart household appliance production, you can control by your mobile phone even if you are in outside of your home
3) excellent design and fast drying by purify the air, it has a pipe with container which can contain the water automatically
4) You can set the working time by minutes and have protection procedures such as when the water container is full. it can stopped automatically and warning for you
Asia Billion Advantages for this project:
1) Asia Billion always keep learning and eager to learn for the new device ideal and technology. this project is a new appliance between home appliance and medial healthy care.
2) We not only make the air dehumidifier plastic housing mold, but also make the plastic housing production for our customer too. we are the one-stop supplier from ideal to final plastic production.
3) Asia Billion design and optimize the final design with our customer's designer team together. we have the early supplier involve capacity for your mechanical design and can reduce the project risk and long development time
Asia Billion company viewing:
Air dehumidifiers are also called dehumidifiers, they are mainly divided into household dehumidifiers and industrial dehumidifiers from the point of use. The whole dehumidifier is composed of compressor, heat exchanger, fan, molded plastic case and controller.
The moist air is drawn into the machine by the fan, and the frost is formed through the interaction of the refrigeration system (compressor, evaporator, and cooler). The system automatically heats up and defrosts into water, and produces the dry air. The indoor humidity is reduced again and again, the humid space gradually achieves the dry effect. the maintenance is simple. It is less affected by the external environment and has strong dehumidifying ability.
It is widely used in civil air defense engineering, tobacco factory, pharmaceutical factory, scientific research, industry, medical and health, instrumentation, commodity storage, underground engineering and computer room, archive room, warehouse and other high humidity places, it can prevent instruments, meters, computers, telecommunications equipment loss caused by dampness, rust and mildew caused by medicines and materials.
It can work normally when the ambient relative humidity is 35-95% and the ambient temperature is 5-38 degrees Celsius.
Free setting function of dehumidification mode:
(1) Humidity mode (2) Dry mode (3) Dry mode (4) Continuous dehumidification mode
High and low wind speed
Precautions for use:
1. In an environment with a room temperature of 15-30C and a relative humidity below 90%, the dehumidifier can remove moisture from the air to achieve the purpose of drying the air. But when the relative humidity is lower than 50% or the air dew point temperature is lower than 4 ℃. Not suitable for use.
2. When installing and using the air dehumidifier, there should be enough space in the air inlet to ensure the air flow, and the best place is in the middle of the room.
3. Master all the relevant data in the performance of the dehumidifier, especially the voltage standard and the start interval time.
4. When the air dehumidifier is working, it is necessary to prevent the electrical switch from getting wet. In order to prevent electric shock from causing electric shock to human body.
5. Pay attention to the positive and negative rotation of the machine. The judgment method is: after the dehumidifier is installed and powered on, it is necessary to check whether the direction of the wind hunger is consistent with the marked direction.
6. The compressor can be restarted after stopping for 3 minutes, otherwise it will damage the compressor
7. When the air dehumidifier is moving, it must be upright, not lying down, and prevent excessive vibration, so as not to cause the pipeline in the machine to break and cannot be used.
Asia Billion is a ISO 9001 certified custom plastic injection mold manufacture in China, each year we made hundreds mold for our global customers. we are willing to learn the new innovational device development to support our customer and help the people to have better life , this air dehumidifier plastic housing mold development is a starting of our new target project. if you have any smart device home appliance or iot device project which need the mold suppliers, Asia Billion can try our best to service you.