Plastic Injection Mould Company

Plastic Injection Mould Company

high quality plastic injection mould company for you in China.this part is a electronic plastic injection molding enclosures for some instruments monitoring panel. ABS white color with texture. Asia Billion can help you for the low cost but high quality injection mould and moulding project. if you have any question, please let me know freely .

Product Details

 Low cost and high quality plastic injection mould company for you in China.  It is a electronic plastic injection molding enclosures for some instruments monitoring panel.  ABS white color with texture. Asia Billion is a injection mould  maker and can help you for the low cost but high quality injection mould and moulding project. if you have any question, please let me know freely . 


Project details as below :

 

Type:

plastic injection mould

Core surface finish:

polish

Production Material:

ABS

Cavity surface finish:

texture

No of Cavities:

1 cavity

Injection System

cold runner

Core Material:

 1050

Type of gating:

Sub gate

Cavity Material:

P20H

Ejection system:

Ejection pin

Slider material:

P20H for 4 lifters

Lead time for T1:

3 weeks

Mold base steel:

1050

Shot life:

50 000

Total Mold Price Totally:

USD 4000

Manufactures:

Asia Billion

 

 Product Characters:

1) Low cost plastic injection mould solution and offer

2)    300x400 mm size prototype injection mould with USD 4000 totally

3)   ABS plastic injection moulding production with small MOQ up to 500 pcs

4)   Texture surface finishing with RAL9010 white color

5)   UV-resistance material 


Asia Billion plastic injection mould Process showing:


Asia Billion Precision Injection mold Process



engineering and project capacityPlastic injection mould Workshop Overview:


Asia Billion Mold making tool shop overview


Packing and Logistics:

Packing and logistics


718h and 738h and P20 Plastic Injection Mould steel difference

 

     718H, 738H, P20 belong to the same type of steel - 718H and 738H pre-hardened plastic mold steel, the steel has been pre-hardened, mechanical cutting is not too difficult, is the production price of plastic mold steel. 718H / 738H / P20 these three materials are not very different,


1, hardness, 718H hardness between 33-36 HRC, 738H hardness between 30-35 HRC, P20 hardness between 28-35 HRC.


2, chemical composition: 718H is an improved version of P20, 718H = P20 + Ni, 718H in the mold side of the luminous degree is significantly better than P20,738H between the two, so the general mold in the choice of materials, will be more Ignore 738H. Other capacity of the difference is not very big!

 

   718 mold steel corresponding to our brand 3Cr2NiMo, is based on the P20 (3Cr2Mo) developed on the P20 improved steel, the quality of a greater improvement to make it fill the lack of P20 mold steel to meet the P20 mold steel does not meet the requirements occasion.

 

  718 mold steel can be carburized to further improve the surface properties. 718 mold steel use and P20 type of mold steel the same, but because of better hardenability, superior performance, you can make large size, high-grade plastic mold forming parts.

 

  718 mold steel chemical composition (mass fraction,%)


ElementCSiMnMoCrNi
Content (%)0.3-0.40.2-0.41.0-1.51.4-2.00.3-0.550.8-1.2

  

   P20 mold steel chemical composition:

Carbon SiliconCrMnMoPhosphorus ≤ S Sulfur ≤
0.370.61.91.450.20.030.03

 

    718 is Sweden's advanced pre-hardened plastic mold steel, 738 is the German high-purity pre-hard plastic mold steel, performance is almost.


   If the emphasis on toughness, the appropriate election 738, because 738 Mn, Cr, Ni content higher than 718, hardenability is better, better toughness, suitable for polishing or grain surface has a relatively high product.

  If the emphasis on strength, wear resistance, suitable for election 718, because 718 C, Mo content higher than 738, higher hardness, grain fine, well polishing in generally.


 When you need a good plastic injection mould company and platsic molding supplier with low cost, good customer service , fast leadtime and excellent quality, Asia Billion will be your preferred choosing 

Hot Tags: plastic injection mould company, China, custom, manufacturers, company,
Previous:China Plastic Injection Mold Suppliers Next:Plastic Housing Mold

Inquiry

You Might Also Like