Asia Billion is innovative custom plastic battery holders and enclosures manufacture in China. we can help you to design your ideal concept , 3d printing or cnc machining prototype samples, injection mould fabrication , mass production injection molding and second operation for assembly. This project is made for our Singapore and Japanese customer for some electronic devices，the battery is rechargeable battery, not the disposable battery. the material is ABS from Japan and assembly the metal clip and spring after production molding.
Project details as below :
electronic plastic injection molding
Core surface finish:
Cavity surface finish:
No of Cavities:
one drop Yudo hot nozzle
SKD 61 with heat treatment
Type of gating:
|SKD 61 with heat treatment|
ejector stripper plate
SKD 61 with heat treatment and nitridation
Lead time for T1:
Mold base steel:
Futaba P20 steel
1 000 000 cycles
cycle time per shot:
1）Japanese standard plastic injection mould for battery plastic housing & enclosures
2) No visible injection gate and ejector pins marks both for the outside and inside surface finishing
3) Fast lead time with short total project time lines
4) Second operation to assemble the metal clip and spring in Asia Billion side
5) Injection molding mass production in Asia Billion side and full inspection for functions
Asia Billion Advantages for this project:
1）Competitive price with Japanese quality standard
2) Well known for Japanese customer's requirements and standards
Asia Billion plastic battery holders tooling plant Overview:
Asia Billion Mold Engineering and Project control capacity:
Asia Billion plastic battery holders quality control system:
Asia Billion Logistic and Shipment:
Rechargeable AA battery introduction
The rechargeable battery is a rechargeable battery with a limited number of times of charging, and is used with a charger. The market generally sells No. 5 and No. 7, but also has No. 1. The advantages of rechargeable batteries are economical, environmentally friendly, and sufficient power, suitable for high-power, long-term use of electrical appliances (such as Walkman, electric toys, etc.). The voltage of the rechargeable battery is lower than that of the same type of disposable battery. The AA battery (charge No. 5) is 1.2 volts, and the 9V rechargeable battery is actually 8.4 volts. Now the average number of times of charging can be around 1000 times.
The material of the positive electrode plate of the nickel metal hydrogen battery is nickel oxide powder, the material of the negative electrode plate is a hydrogen absorbing alloy, and the electrolyte solution is potassium hydroxide solution. The open circuit voltage of the battery is 1.2V. The lithium ion battery uses LiCoO2 composite metal oxide to form an anode on the aluminum plate, the lithium carbon compound forms a cathode on the copper plate, and the submicron microporous polyolefin film separator between the plates, electrolysis The liquid is an organic solvent. The open circuit voltage is 3.6V.
The battery capacity represents how much battery the battery can store. The numbers we see on the battery pack generally refer to the battery capacity indicator. It is expressed in units of ampere-hours or milliamps. It is a composite unit consisting of the current unit and the time unit product, representing the ability of the battery to sustain discharge at a constant current. A fully charged battery can be discharged with a current of 200mA for 10 hours. By multiplying the current by time, we can get the capacity of this battery is 2000mA.H. If it is discharged at 400 mA, the available time is 5 hours.
Energy density: The amount of electrical energy contained in a unit volume or unit weight. For the same power requirements, a battery with a high energy density can be smaller in size and lighter in weight.
If you need to make some plastic battery holders or battery enclosures or batthery plastic molds , please contact Asia Billion freely at:
Asia Billion Innovational Technology Ltd
Mobile for business: +86-134 8063 8827