Ip Camera Plastic Housing Injection Tooling

Ip Camera Plastic Housing Injection Tooling

it is the ip camera plastic housing injection tooling manufacturing and custom plastic housing molding productiion our one of our security OEM customer, high tehchnology for smart camera and monitoring device for home and office. let us know freely if you also need to find good custom camera plastic houssing and enlosures supplier.

Product Details

this project come from a famous worldwide security OEM manufacture in China, we custom make the ip camera plastic housing injection tooling according to their design and run the mass production plastic enclosures in our plant. we are the subcontractor for the total mechanical parts which included some metal screw and glass plates too. 

 

Production details:  

Type:

electronics plastic injection molding

Core surface finish:

polishing

Production Material:

ABS and PC

Cavity surface finish:

polishing

No of Cavities:

4

Injection System

cold runner

Core Material:

NAK 80

Type of gating:

sub gate and edge gate

Cavity Material:

LKM 738H

Ejection system:

ejector pin and ejector sleeve

Slider and lifter material:

H13 with heat treatment

Lead time for T1

5 weeks

Mold base steel:

1045

Shot life:

500 000

Place of Origin

China

Mold standard :

LKM


Product Characters:

1) Security production which need good function performance and vast times testing to get the certifications

2) Excellent biographic design, it will make people love it when you see them 

3) Good performance for UV resistance,anti-lighting and Infrared ray

4) ICR infrared filter type automatic switching, continuous monitoring day and night. it use high-efficiency dot-matrix infrared light, the night vision irradiation distance can reach 30 meters

5)IP67 dustproof and waterproof, meet various indoor and outdoor application scenarios


Asia Billion Advantages for this project:

1)  Experience for the camera and security production development and mold making

2) Cost efficiency and short lead time , we can help you save at least 10% cost and time than other competitors

3) Asia Billion can work with customer honestly and high efficiently, no matter the project is small or big


Asia Billion plastic injection tooling quality control:

Plastic Injection Tooling Quality Control


   The security camera is a device for monitoring and keeping watch.The CCD chip is like a human retina and It is the core of the security cameras. At present, China has no ability to manufacture. Most cameras on the market was made by companies such as SONY, SHARP, Panasonic, and Fuji. Samsung also has the ability to produce. Because the chips are produced in different grades and the manufacturers have different ways to obtain them, the CCD acquisition effect is also very different. Generally speaking, the larger size and the higher the resolution of the CCD panel is more clearly .


   The installation of the camera can directly affect its service life and the quality of the picture obtained, so the installation steps are not sloppy.


1. The viewing and installation environment meets the requirements of the monitoring target field , and its installation height indoor ground should not be lower than 2.5m; and outdoor ground should not be lower than 3.5m.

2. Determine the installation location, monitor and its supporting devices,

Such as lens, protective cover, bracket, wiper, etc, the installation should be firm, the operation should be flexible, it should pay attention to prevent damage and coordinate with the surrounding environment.

3. In a strong electromagnetic interference environment, the installation of the surveillance camera should be insulated from the ground.

4. The signal cable and the power cable should be introduced separately. The exposed parts are protected with hoses, which does not affect the rotation of the device.

5. The monitor camera in the elevator should be installed on the left or right side above the door, and it can effectively monitor the facial features of the occupants in the elevator.


   Asia Billion is a ISO 9001 certified plastic injection mold and molding company in China ,  we made a lot of wifi camera, infrared camera, IP camera plastic housing injection tooling and camera plastic parts for our global customers. we are quite experience and have strong capacity to support your security camera project too.  Please let us know freely if we can help you too.


Hot Tags: ip camera plastic housing injection tooling, China, suppliers, manufacturers, company,
Previous:Wireless Remote Control Plastic Housing Injection Mold Next:Fire Alarm Plastic Box Injection Mould

Inquiry

You Might Also Like