China Automotive Plastic Injection Mold

   Here is one of our significant project for this month and we would like to share the details with you. These 2 housings are for Media player and GPS navigation module system for Hyundai i10 and Honda city after market modification service.

   The main market are old Commonwealth of Nations ( UK, Canada, Australia, India, South Africa , Hong Kong and so on ). These 2 moulds are the first project and will have another at least 10 batch for all the most hot sales automobile all over the world.

Project details as below :

    If you have any plastic injection mold project , no matter what it is, you can contact us directly to get our support with good quality and lower price .

   Asia Billion will share you the important project from our side and always support you for your production development requirements all the time . ABIL will be your Target China Automotive Plastic Injection Mold suppliers.

ABIL Plastic Injection Mould Making Process:

ABIL Tooling shop Overview:

ABIL  Certifications and Quality Control:

Mold Packing and Logistic:

ABIL Injection Mold Order Procedure:

http://www.asia-billion-moulds.com/news/injection-mold-order-procedure-4347520.html

Three problems that must be paid attention to during the injection molding process of car navigation frame

   As we all know, injection molding is a very delicate process, and it involves only a few disciplines such as physical chemistry, so be careful. The following car panel injection molding manufacturers will briefly introduce the three precautions for the injection molding of the car panel, hoping to help everyone.

  1. Different materials, the temperature required for injection molding of automotive navigation frame panels is also different. If the temperature is too high or too low, it will have a bad effect on the processing of the material, and the effect of the finished product will be reversed. For example, if the temperature is too low, the color of the liquid material will be abnormal. If the temperature is too high, the product will have a priming appearance after the output, and the quality will not meet the demand. 

  2. In the injection molding process of the automotive navigation frame panels, it is necessary to pay attention to controlling the speed inside the pouring channel. It is assumed that there will be a burr when it is too early, and it will cause the filling to be full and burnt. Assuming that the time is too slow, there will be a shrinking appearance, as well as a brief cracking. Therefore, the time of pouring must be paid attention to the control of its processing speed, so that the quality of the products produced can reach the demand.

  3, in the automotive navigation frame panels injection molding processing needs to pay attention to control the cooling time, the detailed time required also depends on the details of the processed products to choose. The cooling time will have a greater impact on the brightness of the finished product, so it is necessary to pay more attention to it.

  Asia Billion can help you design and optimize your automotive navigation frame panels injection mold from concept to mass production injection  molding.  we had cooperated with many world famous automotive navigation frame panels  OEM companies  from Japan, USA and Germany.  As a professional China Automotive Plastic Injection Mold makers , we belive that we can help you more than others.